Moulded articles
Cable Bushings
SIEGEL Dichtungen is your manufacturer of cable bushings, cable grommets and sealing inserts made of elastomers and TPE. Our solutions protect cables and lines from damage, provide strain relief and kink protection and prevent the ingress of moisture, dust and media, up to high IP ratings to IEC 60529.
Materials
Various elastomers & TPE
Approvals
IP rating (IEC 60529) · UL94
Manufacturing
Compression or injection moulded
Series
Small to large series
Your benefits
Why Cable Bushings from SIEGEL
Custom manufacturing
Round, oval, rectangular or in a customer-specific contour, with or without membrane, as strain relief and kink protection.
Wide range of materials
EPDM (UV, ozone and weather resistant), CR/Neoprene (self-extinguishing), NBR (oil and grease resistant), silicone and FKM for high temperatures, and TPE. The right solution for every application, on request also to various standards and approvals.
High IP ratings
Designed for IP 64, 65, 66, 67 and 68 to IEC 60529, against moisture, dust and media.
ISO 9001 certified
SIEGEL Dichtungen stands for ISO-certified quality.
Technical data
Product specifications
Specifications may vary depending on the material option. Contact us for further information or specific requirements.
Material & grades
Elastomers such as EPDM, CR (chloroprene), NBR, silicone and Viton (FKM) as well as TPE, on request also electrically insulating rubber compounds with a specific volume resistance.
Sizes & dimensions
Can be produced in a wide range of sizes and diameters, from small to large.
Types & designs
Round, rectangular and oval shapes, grommets with a fixed closure, membrane versions as well as high-voltage and underwater versions.
Temperature resistance
Depending on the material, from -40 °C to > +200 °C.
Standards & approvals
UL 94 in a self-extinguishing version and FMVSS 302, ATEX and IP ratings to IEC 60529.
Sealing properties
Protection against moisture, dirt, dust and contaminants.
Assembly
Simple assembly by inserting into the screw fitting or electrical component.
Your application
Special requirements for material or standard?
Tell us about your application, for example media, temperature ranges or standards. We recommend the material and the matching manufacturing process and provide samples in advance on request.
Materials & standards
Suitable materials & approvals
Cable Bushings are manufactured from the following materials and, on request, designed to meet the relevant standards and approvals. The linked pages provide details on properties, resistances and regulations.
Standards & approvals
For an overview of all tests, see Standards & approvals.
Process
Manufacturing & processes
More on manufacturing & tolerances
Sealing, protecting and strain-relieving cables
As moulded articles, we manufacture cable bushings and cable grommets from elastomers and TPE, round, oval, rectangular or in a customer-specific contour, with or without membrane. Depending on the requirements, we select the right material, from weather-resistant EPDM through self-extinguishing CR and oil- and grease-resistant NBR to silicone and FKM for high temperatures.
Suitable for a variety of applications: if a cable is routed through sharp-edged openings, for example, these seals prevent damage to the outer sheath of the cables and lines. At the same time, they provide strain relief and kink protection and prevent the ingress of moisture, dust and media.
Product range
Related products
Cooperation
The right Cable Bushings for your application?
Tell us about your application, for example media, temperature ranges or standards. We recommend the material and the matching manufacturing process and provide samples in advance on request.