Moulded articles
Sealing Inserts
SIEGEL Dichtungen is your manufacturer of sealing inserts made of elastomers and TPE. The inserts are fitted into screw fittings and components and provide full-surface, long-lasting sealing against moisture, dust and various media. Produced at our site in Linsengericht-Altenhaßlau, Germany, ISO 9001 qualified.
Materials
Various elastomers & TPE
Approvals
IP rating (IEC 60529) · DIN ISO 3302-1
Manufacturing
Compression or injection moulded
Series
Small to large series
Your benefits
Why Sealing Inserts from SIEGEL
Custom-made
Round, oval, rectangular and free-form contours, colour-coded on request.
Multiple functions
Sealing, edge protection, strain relief, kink protection and stable feed-through in a single component.
Electrical properties
Available as electrically insulating or conductive (EMC/antistatic).
Wide choice of colours
Various RAL colours possible, for visual integration into your product.
Technical data
Product specifications
Specifications may vary depending on the material option. Contact us for further information or specific requirements.
Material & grades
Various elastomers, e.g. EPDM for outdoor use, CR (chloroprene) in a self-extinguishing version, NBR for oil contact, silicone and Viton (FKM) for high temperatures, and TPE.
Sizes & colours
Can be produced in a wide range of sizes, diameters and colours for a precise seal on your components.
Types & designs
Round, rectangular or oval feed-throughs that tightly enclose the cable or line.
Sealing properties
Reliable, long-lasting sealing against moisture, dust, dirt and other contaminants.
Temperature & chemicals
Materials for a wide temperature range, resistant to various chemicals, media and environmental influences.
Electrical properties
Available as electrically insulating or conductive (EMC/antistatic).
Application
Electrical industry, cable glands, mechanical, plant and motor engineering, and more.
Your application
Special requirements for material or standard?
Tell us about your application, for example media, temperature ranges or standards. We recommend the material and the matching manufacturing process and provide samples in advance on request.
Materials & standards
Suitable materials & approvals
Sealing Inserts are manufactured from the following materials and, on request, designed to meet the relevant standards and approvals. The linked pages provide details on properties, resistances and regulations.
Standards & approvals
For an overview of all tests, see Standards & approvals.
Process
Manufacturing & processes
More on manufacturing & tolerances
Full-surface sealing, guiding and protection
As moulded articles, we manufacture sealing inserts from elastomers and TPE in round, oval, rectangular and free-form contours. They are fitted into screw fittings and components, where they provide full-surface, long-lasting sealing against moisture, dust and various media.
In addition to sealing, sealing inserts also provide edge protection, strain relief and kink protection and allow cables and lines to be fed through securely. On request, they can be colour-coded to RAL and supplied as electrically insulating or conductive (EMC/antistatic).
Product range
Related products
Cooperation
The right Sealing Inserts for your application?
Tell us about your application, for example media, temperature ranges or standards. We recommend the material and the matching manufacturing process and provide samples in advance on request.