Product category
Rubber profiles
At SIEGEL Dichtungen we offer a large selection of rubber profiles designed specifically to seal and protect your products. Available in various cross-sections and formats, manufactured individually to your requirements and installation options. Some common profiles are available from stock, but as a rule we manufacture to order.
Overview
Rubber profiles for sealing and protection
We manufacture rubber profiles in numerous cross-sections: edge protection profiles, U-, H-, T-, angle, half-round, clamping and square profiles as well as wiper rubbers for squeegees. We process various elastomers such as NBR, CR, EPDM, FKM and silicone as well as sponge rubber and silicone foam.
Depending on the application, the profiles are available in various hardness levels from 40 to 80 Shore A and for temperatures from -40 °C to +200 °C. On request, we finish them with a single-sided self-adhesive layer, supply them in bundles or wound on reels, and cut them to length to your specifications.
Product range
Our profile shapes at a glance
This is only a selection of our profiles. Further cross-sections and designs are available on request.
Features
What sets our rubber profiles apart
Many profile cross-sections
Edge protection, U-, H-, T-, angle, half-round, clamping and square profiles as well as wiper rubbers for squeegees.
Wide range of materials
NBR, CR, EPDM, FKM and silicone as well as sponge rubber and silicone foam, depending on requirements.
Various hardness levels
Available from 40 to 80 Shore A depending on the application.
Temperature resistant
Suitable for temperatures from -40 °C to +200 °C depending on the material, resistant to oils, chemicals and solvents.
Finishing
On request with single-sided self-adhesive finish, in bundles or wound on reels, and cut to length to your specifications.
From stock or custom
Some common profiles available from stock, special cross-sections to your requirements and installation options.
Working together
The right profile for your sealing application?
Tell us the cross-section, material, hardness and length. We will recommend the right design and supply from stock or to your specifications.